--Prevailing torque hexagon domed cap nuts with non-metallic insert

DIN 986

--Prevailing torque type hexagon nuts with flange(with non-metallic insert)(ISO 7043:1997,modified)

DIN EN 1663 | Replace DIN 6926

--Prevailing torque type all-metal hexagon nuts with flange (ISO 7044:1997,modified)

DIN EN 1664 | Replace DIN 6927

--Prevailing torque type hexagon nuts with flange(with non-metallic insert)with metric fine pitch thread (ISO 12125:1997)

DIN EN 1666 | Replace DIN 6926

--Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread (ISO 12126:1997,modified)

DIN EN 1667 | Replace DIN 6927

--Prevailing torque type hexagon nuts (with non-metallic insert),style 1 - Property classes 5,8 and 10(ISO 7040:1997)

DIN EN ISO 7040 | Replace DIN 982|DIN 6924

--Prevailing torque type all-metal hexagon nuts,style 2 - Property classes 5,8, 10 and 12(ISO 7042:1997)

DIN EN ISO 7042 | Replace DIN 980|DIN 6925

--Prevailing torque type all-metal hexagon nuts,style 1- Property classes 5,8 and 10(ISO 7719:1997)

DIN EN ISO 7719

--Prevailing torque type hexagon thin nuts (with non-metallic insert )(ISO 10511:1997)

DIN EN ISO 10511 | Replace DIN 985

--Prevailing torque type hexagon nuts (with non-metallic insert),style 1,with metric fine pitch thread-Property classes 6,8 and 10(ISO 10512:1997)

DIN EN ISO 10512 | Replace DIN 982|DIN 6924

--Prevailing torque type all-metal hexagon nuts,style 2,with metric fine pitch thread - Property classes 8,10 and 12(ISO 10513:1997)

DIN EN ISO 10513 | Replace DIN 980|DIN 6925

--Tab washers with long tab

DIN 93

--Curved spring lock washers

DIN 128

--Wave spring washers

DIN 137

--External tab washers(locking tab washers)

DIN 432

--Tab washers with short and long tab at right angles

DIN 463

--Safety cups for cheese head screws according to DIN 84

DIN 526

--Shim rings and supporting rings

DIN 988

--Conical spring washers for bolt/nut assemblies

DIN 6796

--Toothed lock washers

DIN 6797

--Serrated lock washers

DIN 6798

--Mushroom head square neck bolts

DIN 603

--Flat countersunk nib bolts

DIN 604

--Flat countersunk square neck bolts with long square

DIN 605

--Cup head nib bolts

DIN 607

--Flat countersunk square neck bolts with short square

DIN 608

--Wing nuts with edged wings

DIN 314

--Wing nuts with rounded wings

DIN 315

--Pipe nuts with thread as in ISO 228-1

DIN 431

--Slotted round nuts

DIN 546

--Round nuts with drilled holes in one face

DIN 547

--Round nuts with set pin holes in side

DIN 548

--Lifting eye nuts

DIN 582

--Turnbuckles made from steel tube or round steel bars

DIN 1478

--Hexagon turnbuckles

DIN 1479

--Turnbuckles,forged（open type)

DIN 1480

--Hexagon nuts for use with bolts with waisted shank

DIN 2510-5

--Cap nuts for use with bolts with waisted shank

DIN 2510-6

--Sleeves for use with bolts with waisted shank

DIN 2510-7

--Hexagon nuts with a height of 1,5d

DIN 6330

--Hexagon collar nuts with a height of 1,5d

DIN 6331

--Screwed inserts(screw plugs)

DIN 7965

--Self-locking counter nuts

DIN 7967

--Triangular nuts for use with electrical equipment in mining

DIN 22425

--Thin nuts with coarse pitch and fine pitch thread and with small widths across flats

DIN 80705