|
|
||
|
|||
|
|||
|
|||
|
|||
|
|||
|
|||
ASME B18.9 No. 4 Repair Head Plow Bolts(Square Head, Countersunk)
.jpg)
Dimensions of of No. 4 Repair Head Plow Bolts(Square Head, Countersunk) (Inch) |
|||||||
Nominal or Basic Bolt Diameter, D [Note (1)] |
Diameter of Full-Size Body,E |
Width of Head, A |
Maximum Feed Thickness,F |
||||
Max. |
Min. |
Min.(Basic) |
Min. |
Max. |
|||
5/16 |
0.3125 |
0.312 |
0.299 |
33/64 |
0.516 |
0.531 |
0.02 |
3/8 |
0.375 |
0.375 |
0.36 |
41/64 |
0.641 |
0.656 |
0.025 |
7/16 |
0.4375 |
0.438 |
0.421 |
45/64 |
0.703 |
0.718 |
0.03 |
1/2 |
0.5 |
0.5 |
0.438 |
49/64 |
0.766 |
0.781 |
0.035 |
9/16 |
0.5625 |
0.592 |
0.544 |
57/64 |
0.891 |
0.922 |
0.04 |
5/8 |
0.625 |
0.657 |
0.606 |
61/64 |
0.953 |
0.984 |
0.04 |
3/4 |
0.75 |
0.782 |
0.729 |
1 5/64 |
1.078 |
1.109 |
0.04 |
7/8 |
0.875 |
0.938 |
0.853 |
1 17/64 |
1.266 |
1.297 |
0.04 |
1 |
1 |
1.062 |
0.976 |
1 29/64 |
1.453 |
1.484 |
0.04 |
GENERAL NOTES:
(a) For additional requirements, refer to section 2.
(b) The letter “R” shall be shown on top of the repair head to distinguish it from the regular head
bolt.
NOTE:
(1) Where specif ying the nominal size in decimals, zeros preceding the decimal and in the four th deci-
mal place shall be omitted.
(a) For additional requirements, refer to section 2.
(b) The letter “R” shall be shown on top of the repair head to distinguish it from the regular head
bolt.
NOTE:
(1) Where specif ying the nominal size in decimals, zeros preceding the decimal and in the four th deci-
mal place shall be omitted.
Company|
Catalogue|About Steel| Inventory(Stock) | Contact Us|SiteMape|Search|Link
Copyrights©Wenzhou Nanlong Import&Export Trading CO.,LTD.(China),
All rights reserved
WWW.Nan-Long.Com (IFI FASTENER|ASME B18.9 No. 4 Repair Head Plow Bolts(Square Head, Countersunk))